Ribbon Blender Roasting Machine

The RIBBON BLENDER is a proficient and flexible mixing machine for blending of powders and dry granules consistently. Around two third of mass of the vessel of our product is packed to guarantee complete blending. It provides suitable result for blending of dry granules and powder of the outline and form of the combining strip and item container. Further, our ribbon blender can be utilized for food, cosmetic products, pharmaceutical, chemical and so on.
Material must to be charge against the head part. There are port(s) need to be given on the head layer to charge the item and in addition for aerial vent-hole. One release valve integrated at the base side at core of the vessel. The release length could be modify according to the prerequisite, so that item gets release in the another vessel specifically as well as so material dealing with time for release is zero and the working is dirt free

Features:

• Sturdy construction.
• High performance.
• Energy efficient.
• Rugged design.
• Rust resistance.

Ribbon Blender:

In our product the powder progresses from the core to the stop point of the vessel and corner of the vessel to the core of the vessel. Therefore, the demand of complete blending time is highly low and the RPM needed are additionally low.
The dry item gets adequate persistent development because of the form and motion of ribbon and form of the vessel, which progresses item for best standard of mixing.
In addition, the unit is comprise of one worm minimization equipment, couple drive among ribbon gear to blending stirrer, one electrical engine and belt drive among gear and motor. Vessel possessing four pieces of legs with release valve and head cover. Together end of blending shaft is fixed with PTFE and bush gland housing and protection guards are given on ever single moving components

Unique Characteristics of the Ribbon Blender :

• The form of vessel and blending stirrer provides adequate ceaseless development to the granules and powder, result in great quality.
• Every contact components of the Ribbon Blender are manufactured from SS316 L/S304/SS316 standard material.
• Coat Heating/Cooling provision offered as an alternative
• Greatest care is taken to guarantee safe working of the unit
• Crawling provision for stirrer for release of material
• Complete cover on head of the vessel
• Release stature must be balanced, if affirm with request.
• Working board accommodated safe operation of Ribbon Blender
• Midway found material release valve (sliding or butterfly valve)
• Dirt resistant head cover with window offered
• Normal body intactly manufactured from gentle steel and colored in quality model and the similar is claded by SS304 in GMP version
• Protection guards and covers made out of SS304 in GMP Model & made out of mild steel in Standard Model
• Legs are manufactured from M.S & painted in Standard Model & same will be claded with SS304 in GMP Model [Content is already rewritten]
• Board gave with after provision in 500 Liters and greater model. In compact model- just D.O.L. starter is offered for Off-On working of the engine
• Three stage sign facility
• D.O.L. beginner for off-on working of engine
• Exigency stop offered in the panel
• Computerized clock for bunch time configuration
• Constrain switch offered at head cover for security purpose
• Crawling push switch with selector switch for creeping working amid release of material

Advantages :

• Enables betterment in its consistent quality, auto temperature setting is rendered with uniform mixing, zero carbonization of physicals as minimum space between shell & threads
• Provided with reinforced hygienic condition with reduced hand contamination. Obviates dusting of material, fabricated with Stainless Steel contact parts. Enable reduction in labor expenditure with boosted production.

Additional Advantages :

• Can be functioned at higher temperature up to 4000 C in comparison to electrical roasters 225 deg. C.
• The heating starts instantly no need to pre heat the machine, if compared to electrical roasters.
• Insures the reduction in production expenditure up to 25%.
• Increased production with increased roasting capacities.

What is possible apart from Mixing / Roasting with specific attachments: :

• The machines can be configured in such a mode so that cooling the roasted products becomes easy through cooling water current jacket along with the cooling tower
• Specially beneficial for inline product systems, for example ready to cook items (Upma, Dhokla, Gulabjamun pre-mix, Idli), chilly powders etc.
• Addition of small quantity of Fluids Essences etc along with the Spraying Instrumentality.
• Addition of small amount of Powders – Colors as well as Concentrates.
• Agglomerates & lumps can be broken during the formation, mixing and adding Liquids via Lump cutter system.